| Database Project EssayGIS homework Acemyhomework, Pay for Essay, write my research paper

Part 1: Business case analysis_x000D_
_x000D_
The business case proposes the purchase of a network operation center-inside (NOC-Inside); an IBM product that will facilitate the complete automation and packaging of the IT infrastructure for the Network Operation center. The company will be able to deal with its key threats which are the competitors by offering fast and efficient services. The upgrade of the Network Operation center reports from the existing excel forms will enable the company to save $456, 500, in labor over a period of two years. This upgrade will enable the company to track the complete network system without the employment of costly technical experts._x000D_
_x000D_
This innovation will also provide dashboards and reports that are ready-to-use. It will facilitate escalation and instant alert as well as an additional portal based integrated view of the operations of the network system. The automation will increase the productivity of the firm through improved process. For instance, the productivity of the IT staff may go higher by almost 50 hours a year. Network operation center-inside (NOC-Inside) will cost $80, 600 in a period of two years; it will replace the use of excel forms for the network operation center reporting that cost to the company $40, 300 in two years. The payback for the network operation center-inside (NOC-Inside) investment in a period of two years will be 300%. The return period is about 1.6 years._x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Type of assignmentWriter levelTitle of your paperPages_x000D_
Essay Term paper Coursework Research paper Research proposal Grant Proposal Case Study Case Brief Discussion Board Post Reaction paper Response paper Literary analysis Article Review Article Critique Movie Review Movie Critique Book Report Book Review Synopsis Poem Letter Motivation letter Memo Scholarship essay Article writing Blog Article Annotated Bibliography Literature Review Outline Online Test Questions-Answers Multiple Choice Questions Interview Questionnaire Speech Dissertation Dissertation chapter – Abstract Dissertation chapter – Introduction Dissertation chapter – Hypothesis Dissertation chapter – Literature review Dissertation chapter – Methodology Dissertation chapter – Results Dissertation chapter – Discussion Dissertation chapter – Conclusion Thesis Thesis Proposal Thesis/dissertation chapter Capstone Project IB Extended Essay Lab Report Business Report Business plan Marketing Plan White paper Formatting Editing Proofreading Rewriting Revision Powerpoint Presentation Powerpoint Presentation Poster PDF Poster Excel Exercises High School College University Master’s PHD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 _x000D_
SpacingTimeframesCurrencyTotal price_x000D_
Single spaced Double spaced 11 days 9 days 7 days 5 days 4 days 3 days 48 hours 24 hours 12 hours 8 hours 6 hours 3 hours USD EUR GBP AUD _x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Opportunity: A-Z Company faces a business opportunity to save 360 hours of its office labor per year through the automation of the error prone tasks that are manual and time consuming. This automation will support the company’s mission statement of achieving maximum efficiency and effectiveness in service delivery. It will align the organization to its objective of growing effectively while devoting its finance and labor to other functions of generating revenue. Alternatives: On reaching the decision to propose the IBM based product, the company examined five leading network operation centers of automation of product. Four of the products were eliminated due to their cost of $100, 500 and $105, 600 in a period of two years. The four products had a potential to deliver similar benefits as the chosen product. However, due to their potential to scale better, they are viable for businesses that are larger than A-Z business._x000D_
_x000D_
Benefit: The product will highly benefit the company by providing higher capabilities than the current manual system. Ultimately, it will eliminate $40, 300 yearly of costs over the existing system. It will solve two main issues that involve the IT Support team for five hours weekly. Firstly, it will guarantee instant reports of the entire Network system. It will also eliminate errors that are prone to occur while updating the excel forms. _x000D_
_x000D_
Cost_x000D_
_x000D_
Purchase price: 40,300_x000D_
_x000D_
Estimate life cycle: 2years_x000D_
_x000D_
Fee for installation: $ 10,300_x000D_
_x000D_
Maintenance: $10,000_x000D_
_x000D_
Total: 80, 600_x000D_
_x000D_
Financial analysis: Cash flow statement (two years)_x000D_
_x000D_
_x000D_
Costs Year 0 Year 1 Year 2_x000D_
_x000D_
1-12-12 1-12-13 1-12-14_x000D_
_x000D_
_x000D_
System purchase (40,300) 0 0_x000D_
_x000D_
Installation (10,300) 0 0_x000D_
_x000D_
Maintenance (10,000) (10,000) (10,000)_x000D_
_x000D_
subtotal (80,600) (80,600) (80, 600)_x000D_
_x000D_
Savings_x000D_
_x000D_
Manual system 30,300 30,300 30,300_x000D_
_x000D_
labor 10,300 0 0_x000D_
_x000D_
Subtotal 40,600 30,300 30,300_x000D_
_x000D_
Cash flow (40,600) (50,300) (50,300)_x000D_
_x000D_
_x000D_
Sensitivity analysis: To realize the goal of solving human labor, the company hopes to decrease the IT staff labor by 360 hours per year. At present, the company hires 5 full-time IT support staff that spends a mean of 25 hours weekly. In 2011, the company employed a contractor to work 220 hours of the IT staff task hours. By eliminating the labor of the contractor, (220 hours saved) and reducing the full time IT support workers, the company hopes to save up to 360 hours of human labor. Project description: in the event of approval by the management, the IT support team will schedule the installation of the product over a weekend. IBM is expected to conduct all the installation starting with a test analysis. They will be assisted by the A-Z IT support team. IBM will provide training to the full-time IT support team for one day. The company management will carefully monitor the system to ensure that labor saving is achieved. The IT management is expected to hand in a monthly report on labor saving to the management. Implementation plan: the installation will take place over the weekend on 31st November 2012 and 1st December 2012. On Monday, the 2nd of December, the production of the equipment should be ready. Training will occur on the following weekend on 7th December 2012. The proposal recommends the purchase to be done on 20th October 2012 and not later than 25th October 2012. This project will facilitate the organization achievement of a net value of $3000, 000 by 1st December 2014._x000D_
_x000D_
Part 2: System analysis_x000D_
_x000D_
Fact finding: In light of the problem, the company chose the system analyst to conduct an investigation of the company’s network operation center system. The system analyst interviewed the entire IT department in a bid to reveal the key issues underlying the problem. After the interviews the analyst identified two key problems. One of the problem involved the system vulnerability to error while the workers filled the excel forms. The analyst recommended a thorough investigation into the system. This recommendation was approved by the company’s manager. The system analysis phase began with the first step being the requirement modeling._x000D_
_x000D_
In the interview, the system analyst observed that the process was time consuming. The contractor spent many hours inputting data into the excel forms. One of the full-time IT workers spent a lot of time attaching and consequently emailing copies of the forms to higher management. Another full-time IT expert is employed to constantly check the system for any changes in status or rate of network. Two different forms were used: the network master form and the network status/rate change form. This laid the basis for the introduction of a new system._x000D_
_x000D_
The output requirements for a new system were the following: the system must issue an automatic report every 30 minutes of the network status. In case of any errors, the automated system must give specifications that are instant and up-to-date. The automated system must produce hourly reports that show any changes in the network operation. In regard to the input requirements, one of the full-time IT employees must input data into the system terminals to enable the system to record the network efficiency. The process requirements of the new system will involve the daily calculation of network rate, an annual process of updating the company on the operation efficiency and the interface of the system with the entire IT infrastructure and an analysis of daily network orders. The performance requirements will involve instant and automatic operation of the system 24 hours, 7 days per week and the system must respond to changes within 3 seconds. For security reasons, the application and operation of the system must issue logon security. The system must offer a different level of security to the administrator and to the other users._x000D_
_x000D_
Object modeling: The system will utilize the COM object model. This model will encompass various technologies ranging from OLE, OLE Automation, com+, ActiveX and Dcom (Wiesfeld, 2003). The model will enable the reuse of the objects without the knowledge of their inner implementation to form a basis for well-defined interface which will be different from their implementation. Casting of the separate interfaces will be obtained through the use of Query Interface ( ) function. The COM object model will be used in all the .NET languages._x000D_
_x000D_
PART 3: System design_x000D_
_x000D_
Input design: The Input instructions and information involves what the users want in order to go into the system (Fowler, 2006). The user interface in the automated system will not only involve the input screen but a two way communication between the system and the users. _x000D_
_x000D_
The Input instructions and information involves what the users want to go into the system (Fowler, 2006). The user interface in the automated system will not only involve the input screen but a two way communication between the system and the users. The system will reply with the output: messages, feedback, warning, functions and even help. In the system, the design will also involve the different means through which the users will navigate the system e.g. through links, menus and commands that guide the user. While the flowcharts and DFDs are the programmers’ viewpoint of the system structure, the input and out design will be the structure of the system from the users’ viewpoint._x000D_
_x000D_
The input design will originate with the users who are the people in the organization. In regard to this, the input design will incorporate human factors. It will be as simple as possible to reduce the system vulnerability to error. All commands will remain consistent e.g. ESC for regression and ENTER for progression._x000D_
_x000D_
It will utilize organization metaphors and terminologies. Obvious actions such as login will remain default on the system. While deciding the input design for the system, the programmers will provide a variety of options. Below are two types of input design; after careful examination, the organization opted for the first design due to the simplicity._x000D_
_x000D_
To enable easy movement and access into the system, the automated system will provide windows that have various navigation options._x000D_
_x000D_
The automation systems will involve batch input method which is one of the oldest input methods. In this method of input, reports will be collected by the system and periodically forwarded to higher management. The IT team will input the data into the system using an entry device that eventually transforms the data into a machine-readable format. The system will derive the data through business codes with two formats: serialized (based on time of arrival) and sequential (based on an ordered table) (Lippmann, 2008)._x000D_
_x000D_
A sequential business code that sorts by the first name then assigns numbers_x000D_
_x000D_
Output design:_x000D_
_x000D_
Output refers to information that comes to the users from the system. The users of the system are the external entity and even internal (boundary between the manual system and the computer system). The automated system will have two types of outputs: the external output that comes from the system to confirm user actions and trigger other actions from the users. The internal output will stay inside the system and will support the system managers and the users; below is an example that demonstrates the systems external design, and the line represents the boundary between the system and the users;_x000D_
_x000D_
Output will be the most observable component of a working system. They will be justifications of the system. The key objectives while designing the output components of the system will be a system that automatically and instantly provides output, a system that will correctly serve its purpose, and a system that will release the appropriate quantity at the appropriate place. The system will be programmed to release two types of outputs: exceptional reports and detailed reports. The exceptional reports will report information that is exception to some standard and will filter data before its presentation to higher management._x000D_
_x000D_
On the other hand, the detailed reports will comprise documents that will confirm the successful transaction of the system processes and will aid in audit trials before the management inquiry. Some detailed reports from the system will be historical in nature and will give few or no restrictions. The main output medium for the automation system will be a screen medium. It will provide the user with easy access to the information. Information on the screen will only be temporary i.e. at the time the images disappear from the screen, the information will get lost unless redisplayed. Due to this limitation, the system designers will also enable the users to get the output information/data on paper by simply pressing the print option. The outputs will be in tabular formats.